Model No.:JB-5800
FOB Tianjin Price / USD: 1000
Volume(CBM):1.83
Data Sheet: SCREEN：LED Digital showing(18.5; BUTTON：mechanical touch; COLOR：black & white,do not support change color on support tube-handle/ handrail and side bar; NVERTOR：china G-way; MOTO：2.4HP MAX:5HP; BELT：2.4MM; ELT Width：600MM; RUNNING AREA：600*1580MM; BOARD：25MM THICKNESS; ROLLER：DIA60MM, LENGTH:600MM; LEFT MOTO：noisy-less AC moto; Speed：1-20KM/H; Angle：0-20%; Lubrication: none; Power：220V+10% 50/60HZ; User weight：max 160KG; SIZE：2270*955*1655; Price：680$; Payment：TT 100% before loading; Delivery：30days
List price:500-1000
Safety Precautions
Note: Please read the manual before use and pay attention to the following safety precautions.
1. Please ground the wire. If there is no ground wire, it is forbidden to use the treadmill.
2. The treadmill should be used in a dry room. Do not place water or other liquids on the treadmill to avoid moisture.
3. When the machine is working, it should be far away from flammable and explosive materials due to static electricity.
4. The treadmill should be placed stably. The use area is 2500mm×1060mm.
5. The ground power supply should be safely connected to avoid the use of other equipment on the same power cord.
6. It is recommended to use sports shoes, and it is forbidden to use treadmills with bare feet.
7. It is forbidden to use by two or more people at the same time, and the maximum load-bearing weight is 160kgs.
8. Before the running belt does not move, please stand on the pedals on both sides and hold the left and right handrails.
9. The heart rate sensor is not a medical facility. Sometimes it is not very accurate, just to give the user a reference. (Usually, a correct statistic is after 30 seconds)
10. It is not allowed to loosen any adjustment devices of the treadmill.
11. Training equipment can only be used in supervised areas. Do not allow people with heart disease, disability, the elderly, and children under 16 to use this device, or use it under the supervision of a professional.
|
◆Input voltage: AC 220V＋10％ 50Hz ◆Motor rated power: 1750W ◆Maximum power of motor: 5HP ◆Working temperature: 0-40℃ ◆Speed range: 1.0-20.0(km/h) ◆Time range: 0:00－99:59 (minutes:seconds) |
◆Distance range: 0.00－99.9(km) ◆The range of calories: 0－999 (Kcal) ◆Heart rate range: 50-256 (times/minute) ◆Tilt range: (0-20)% ◆Overload protector: 13A ◆Power cord: 16A AC 250V |
Assembly instructions
|
1. Connect the communication line, take M12X65 hexagon head screws, spring washers, flat washers, and install the left and right support columns. |
2. Connect the communication line, take the M10x30 cylindrical head hexagon socket screw, and install the display module. |
 |
 |
|
3. Connect the communication line, take M10x30 cylindrical head hexagon socket screws, spring washers, flat washers, and install the treadmill head. |
4. Take M4x19 and M4*40 screws and install the motor cover. |
 |
 |
Socket and power switch position
The power position of this product is at the bottom of the treadmill. When the power switch is in the "O" position, it is disconnected; when the power switch is in the "-" position, it is in the connected state.
Running belt adjustment method
1. How to adjust the running belt deviation:
If the walking belt deviates to the left, you can adjust the left adjustment screw clockwise or counterclockwise to adjust the right adjustment screw. If the walking belt deviates to the right, you can adjust the right adjustment screw clockwise or counterclockwise to adjust the left adjustment screw. It is recommended to adjust ninety degrees (a quarter of a circle).
2. How to adjust the tightness of the running belt:
If the running belt is loose as a whole, the user slips during running, or the running belt is too tight (which will greatly increase the power output of the inverter and motor), the running belt needs to be adjusted accordingly.
(1) Tightening: Use the supplied special tool (10#L-type wrench) to adjust the adjustment screws in the left and right adjustment holes of the rear cover clockwise in units of a quarter turn (90 degrees) each time. (The adjustment range on the left and right sides is the same)
(2) Loosen adjustment: Use the supplied special tool to adjust the adjustment screws in the left and right adjustment holes of the rear cover counterclockwise in units of a quarter turn (ninety degrees) each time (the adjustment range of the left and right sides is the same).
Instructions for Control Panel (LED)
Buttons and functions:
A: Start: Start the treadmill.
B: Pause: Put the treadmill in a pause state.
C: Stop: stop the running of the treadmill.
D: Exercise program: The treadmill has a built-in training program, and the user has 8 programs to choose from.
E: Custom goals: users set time, distance, and calories by themselves.
F: Speed+: Speed increase button.
G: Speed -: Speed down button.
H: Slope+: Slope increase button.
I: Slope -: Slope decrease button.
J: Speed shortcut key: speed quick selection key (2, 4, 6, 8, 10, 12)
K: gradient shortcut key: gradient quick selection key (2, 4, 6, 8, 10, 12)
L: Movement distance: Movement distance display window.
M: Calories: Display window of calories consumed by exercise.
N: Heart rate: Heart rate display window.
O: Time: Display window of exercise time.
P: Speed: The current speed display window.
Q: Slope: The current slope display window.
Quick instructions
1. Manual mode
1) Turn on the power switch.
2) Press the "START/STOP" button, the system enters a 3-second countdown, the buzzer sounds, and the central dot matrix display area window displays the countdown. After the 3-second countdown is completed, the treadmill starts running at a speed of 1km/h.
3) After starting, you can use the "SPEED+" and "SPEED-" keys to adjust the speed of the treadmill; press the "INCLINE+" and "INCLINE-" keys to adjust the slope of the treadmill.
2. Exercise program
In the standby mode, press the exercise program button to enter the selection of 8 fixed programs, click the speed + and-buttons to adjust the required exercise time, press the start button, the treadmill starts to run.
Daily maintenance
The electric treadmill adopts imported special running belt and is made of special composite material production technology. It has the advantages of low friction coefficient, high tensile strength and low noise. The running board uses a unique dual shock absorption system. The upper urea-formaldehyde resin board has a high surface finish and super wear resistance, which makes the movement more comfortable and smooth!
1. When the machine is dirty or the lubricating oil is reduced, the friction coefficient between the running board and the running belt will increase, and the load output power will increase. Therefore, the surface of the running board and running belt may be severely worn. (Motor, inverter, drum, motor belt, etc.) The entire transmission system is seriously damaged. This damage is not covered by the warranty.
2. The lubrication of the running board and running belt must be checked at least once a week. Please increase the amount of treadmill oil according to the actual frequency of use of the treadmill in the fitness club. (If each machine is used for 6 hours or more per day, add oil every ten days or so, and increase by about 50ml each time. If each machine is used for 6 hours or less, then every fifteen days Add oil once from left to right, and add about 50ml each time for each machine)
Remember: Do not use excessive lubricating oil. The more lubricating oil is not the better. Reasonable lubrication is an important factor to improve the service life of the treadmill.
3. Judge the size of friction:
Unclean or reduced lubricant will increase the friction between the running board and the running belt, and may cause damage to the motor and inverter. Too much friction has the following characteristics:
(1) In the power-off state, pedaling the treadmill belt with your feet will feel very difficult or even unable to pedal.
(2) The treadmill is normal without load, and the speed obviously slows down or stops irregularly under load.
(3) Increased friction may cause abrasion of the running board of the running belt, damage to the motor and control board, tripping of the overload protector, and inverter protection.
|
Product name |
Commercial treadmill |
Model |
JB-5800B |
|
Equipment Picture |
|||
 |
|||
|
Technical Description |
●Display: LED digital display (18.5) ●Keys: mechanical keys ●Overall color: black and white, column + handrail + side strip white and cannot be customized ●Inverter: domestic inverter●Running motor: 2.5HP peak 5HP ●Running belt thickness: 2.4MM ●Width of running belt: 600mm ●Running range: 600*1580MM ●Thickness of running board: 25MM ●Drum structure: diameter 60MM, length: 600MM ●Lifting motor: ultra-quiet AC motor ●Speed range: 1-20KM/H ●Slope range: 0-20% ●Automatic lubrication: none ●Power interface: 220V+10% 50/60HZ ●Maximum load-bearing 160KG ●Size (length * width * height) 2270*955*1655 ●Regular color: white, custom colors are not supported ●Standard: 1.75KW motor |
||
a. Delivery Time: Within 30 days after receiving the deposit
b. Warranty: 1 Year Warranty after receiving machine
c. Spare Parts: 2% of total amount easy worn spare parts is provided, pls inquire for the Spare Part List
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is7-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: 30% T/T in advance ,balance before shipment. Or L/C.
Q: What is the MOQ?
A: 1 set for strength equipment and 5 sets for treadmill or exercise bike.
Q: How about your after-sales service?
A: We'll send you the component for free to replace the damaged one during the warranty period.
Q: Could you give me a scheme about the gym club?
A: Yes, we can give you a precise project, a best design for free according to the square and your idea.
Q:How about the Packing
A:1. Seperated packed in woodencase for saving container space and cost
2. Complete package for avoid your assemble
A: 1 ) We are top brand of commercial gym equipment manufacturer in China, and we have more than 20 years experiences in this filed, we have already exported to more than 100 countries and regions.
2 ) Our factory has a construction area of 200,000 square meters, with laser pipe cutting machine, welding robot, electronic painting, assembly line and other first-class production equipment.
3 ) Our products have been approved by CE and Rohs certificate, our company has ISO9001 , ISO14001,OHSAS18001 certificate. We examine and test all machines before delivering.
4 ) We have professional R&D Team, developing new products for you. And of after-sales service department will serve you when you need.
5 ) We have young but well-rounded team . Looking forward to our further cooperation.
Pls feel free to contact us Shandong Baodelong Fitness Co.,Ltd., we will try our best to cooperate with you.
Hot Tags: Commercial Treadmill Gym Use High Quality Treadmill, China, factory, suppliers, manufacturers